Original
By certification 
I. Automatic Tank End Welding Machine Application
1. automatic tank end welding machine is used to complete inlet nozzle circular seam welding. Melting thickness and width will be able to reach welding requirement. With uniform and smooth welding appearance.
2. MIG welding with wire feeder.
3. Ensure no-leakage and to prevent air leakage.
II. Technique Parameters
Rotation speed |
1-8r.p.m |
Air pressure |
0.4-0.6MPa |
Welding torch adjustment |
50mm (up&down, left&right) |
Welding power source |
350A |
Machine working voltage |
custom-made |
III. Automatic Tank End Welding Machine Structure
1. Cylinder driven welding torch can be manually adjusted in four directions. Welding deformation can be reduced significantly.
2. Japan OMRON PLC and touch screen are used to control the whole machine. Welding current, welding voltage, crater current, crater voltage, welding speed and welding angle can be preset,stored and recalled in system. Welding torch will go to mechanical point after finishing the seam.
3. We will design jig and fixture for tank end. Guarantee concentricity.
4. Pulse mig welding power source controls heat input for good penetration and reduced spatter and smoke.
5. Offer system remote trouble shooting service.
http://de.chinatopcncmachinery.com/
